16
©2017 Hot Products. All rights reserved.
INTAKE
SYSTEMS
SEA-DOO
4 STROKE
ENGINE/
GASKETS
EXHAUST
DRIVE LINE
HANDLING
ELECTRICAL
WATERLINE
/BILGE
STEERING
& CONTROLS
BODY
ACCESSORIES
SERVICE TOOLS
/HARDWARE
CHEMICAL
Orders & Info: 858-453-4454 • HotProductsUSA.com
Sea-Doo Spark Parts & Accessories are now in the new
Sea-Doo Spark
feature section pages 8-13
SEA-DOO 4-STROKE • SUPERCHARGER
R&D SUPERCHARGER SLEEVE
The sleeving up of the diameter of the Supercharger enables a 3.5" or 4" intake fil-
ter system to be utilized.The larger intake increases cubic air volume as well as
decreases air inlet restriction. A win win, supercharge your supercharger and give
it more air! Available in 3.5" and 4" diameters. Fits all Supercharged 4-Tec Models.
Description Part No.
R&D Supercharger Sleeve 4" Diameter
613-95044
for Sea-Doo 300
R&D Supercharger Sleeve 3-1/2" Diameter
613-95035
for Sea-Doo 185
R&D Supercharger Sleeve 4" Diameter
613-95040
for Sea-Doo 185
ET 137X4MM CR
DROP IN WHEEL
FOR 255/260
ET Light Edition Billet Impeller
with 4mm spacer. Aftermarket
pressure regulator (not included)
is required for this modification.
48 lbs injectors are required for this modification (not included). *Some Sea-Doo
255/260 models come with 48 lbs injectors from the factory, please check your
OEM specifications before installing this upgrade. 13 to 13.5 lbs of boost
@8100 rpm and 15 lbs boost@8500rpm (Clutch slip must be set to 15 lbs)
Description Part No.
15 PSI Boost Supercharger
ET137X4MM CR
Billet Impeller with 4mm spacer
RIVA SEA-DOO 215
XX CHARGER
12.5 PSI @ 8,600 rpm
11 PSI @ 8,100 rpm
Description Part No.
Sea-Doo 215 Charger
RS1750-001C
RIVA Supercharger Impeller Replacement Nut
RS1750-001A-N
RIVA SEA-DOO 255/260
XX-2 CHARGER
13.5 PSI @ 8,100 rpm
15 PSI @ 8,500 rpm
Description Part No.
Sea-Doo 255/260 Charger
RS17080-SCI-XX2
RIVA SEA-DOO 300
XX CHARGER
12 PSI @ 8,000 rpm • 15 PSI @ 8,400 rpm
17.5 PSI @ 8,700 rpm
Description Part No.
Sea-Doo 300XX Charger
RS17140-135
ET 142MM 300 SEA-DOO
The all new ET 142mm x 3.2mm spacer do-it-yourself. New generation wheel
for 2016 Sea-Doo 300 platform. Makes 22 PSI at 9,000 rpm. The new 1.6L
engine is designed for midrange to 8,800 rpm. ET does not recommend
revving over 9,000 rpm. Requires the back housing to be machined to
143mm. Recommended slip moment be set to 18 foot lbs. There are a few
things that are recommended in updating before running any performance.
Replace all hose clamps with screw clamps. Retorque all head bolts, ECU
remap 8,600 to 8,800 rpm rev limit.
Description Part No.
A.
22 PSI of Boost Supercharger
ET142/300
Billet Impeller with 3.2mm spacer (Do it yourself)
B.
22 PSI of Boost Supercharger
ET142/300-COMPLETE
Billet Impeller with 3.2mm spacer with machined OEM housing
ET 135MM
300 SEA-DOO
The all new ET 135mm x 3.2mm
spacer drop-in wheel. New gener-
ation wheel for 2016 Sea-Doo
300 platform. Makes 17.5 PSI at
8,800 rpm. The new 1.6L engine
is designed for midrange to 8,800
rpm. ET does not recommend revving over 9,000 rpm. Recommended slip
moment be set to 16 foot lbs. There are a few things that are recommended in
updating before running any performance. Replace all hose clamps with screw
clamps. Retorque all head bolts, ECU remap 8,600 to 8,800 rpm rev limit.
Description Part No.
17.5 PSI of Boost Supercharger
ET135/300
Billet Impeller with 3mm spacer
A.
B.
