Basic HTML Version
168
IMPROS CUSTOM MODIFIED SOLAS IMPELLERS
KAWASAKI 750/800 HOOKER IMPELLERS
The Impros Hooker 140mm impeller for the Kawasaki 140mm pump
is a 3 blade large hub diameter, radial edge design polished stainless steel
impeller designed and intended for Bottom end and "Hook up" for freestyle
and freeriders on an SXR, SXi Pro, or SX that utilizes the 140mm pump
and want maximum AIR for tricks. Impros gave it this name because it
"Hooks Up" so well. Designed around maximizing pump efficiency and
bottom end, this is a new radial edge design, large hub, and is set back.
It is a highly polished Kawasaki impeller that we will have available for
the 140mm stock pump used in the SXR 800 and 750. Designed with a
steep root angle to load the pump well. Material is a 17-4 stainless steel
cast. Dynamically balanced, and comes polished, with a rubber nose seal.
We have it available in a variety of pitches for different engine set ups. The
pitches available are 9/15, 10/16 and 11/17. These numbers are much
different from other impeller pitches you have heard of. While they are very
low, and directed at bottom end "Hit", the root angle, blade length and other
geometric differences set the Hooker apart from the others.
Recommendation
Part No.
Stock, Limited, Maximum Bottom End
IMK140915
Limited with Porting, Big Carb., More Top End
IMK1401016
Closed Course Race with Pipe, Max. Hookup,
IMK1401117
Added HP/Performance
YAMAHA HOOKER IMPELLERS
The Impros Hooker 144mm impeller for the Yamaha is a 3 blade large hub
diameter (75mm), radial edge design polished stainless steel impeller
designed and intended for Bottom end and "Hook up" for freestyle and
freeriders on a Superjet, Blaster, or similar ski that utilizes the 144mm pump
and want maximum AIR for tricks. We gave it this name because it "Hooks
Up" so well. Designed around maximizing pump efficiency and bottom end,
this is a new radial edge design, large hub (75mm), and is set back 7mm
(4mm further than we can go with a small hub impeller). It is a highly
polished Yamaha impeller that we will have available for the 144mm stock
pump. Designed with a steep root angle to load the pump well. Material is a
17-4 stainless steel cast. Dynamically balanced, and comes mirror polished,
with an impeller tool and rubber nose seal.
Recommendation
Part No.
Stock, Limited, Maximum Bottom End
IMY144915
Limited with Porting, Big Carb., More Top End
IMY1441016
Closed Course Race with Pipe, Max. Hookup,
IMY1441117
Added HP/Performance
YAMAHA SUPERJET FREESTYLE IMPROS
CUSTOM SOLAS SET BACK IMPELLERS
Impros set back custom pitched impellers are modified to maximize bottom
end and get the most air out of your ski! These impellers work with the
stock pump, with & without the TBM Super Pump Cone.
Race Class
Description
Part No.
Freestyle 13/15 Solas Concord -3mm
YBCD1315SB
Stock/Ltd.
13/15 Solas Concord -3mm
YBCD1315SB
Modified 13/16 Solas Concord -3mm
YBCD1316SB
KAWASAKI 800 SXR IMPROS CUSTOM
SOLAS SET BACK IMPELLERS
Impros Set Back impellers are custom pitched to maximize performance
& engine rpm for specific applications. These Solas Dynafly impellers are
machined -5mm to set them closer to the pump vanes, which maximizes
pump hook up. The impellers fit right into stock SXR pump.
Race Class
Description
Part No.
Freestyle 13/19 Solas Dynafly -5mm
KPDF1319SB
Stock
13/21 Solas Dynafly -5mm
KPDF1321SB
Limited
13/23 Solas Dynafly -5mm
KPDF1323SB
Modified 14/24 Solas Dynafly -5mm
KPDF1424SB
INTAKE
SYSTEMS
FOUR
STROKE
ENGINE/
GASKETS
EXHAUST
DRIVE LINE
HANDLING
ELECTRICAL
WATERLINE
/BILGE
STEERING
& CONTROLS
BODY
ACCESSORIES
SERVICE TOOLS
/HARDWARE
CHEMICAL
©2012 Hot Products. All rights reserved.