2010 Hot Products Catalog

31 YAMAHA 4 STROKE INATKE SYSTEMS ENGINE/ GASKETS EXHAUST DRIVE LINE HANDLING ELECTRICAL WATERLINE /BILGE STEERING & CONTROLS BODY ACCESSORIES SERVICE TOOLS /HARDWARE CHEMICAL YAMAHA FX-SHO & FZ • FUEL SYSTEM R&D FX- SHO/FZR/FZS HIGH PERFORMANCE FUEL INJECTOR KIT When boosting the horsepower on the FX-SHO/FZR/FZS four stroke fuel injected engine, whether using high compression pistons, cams, or higher ratio supercharger compressor wheels, it will be necessary to increase the fuel flow delivery. The OEM Yamaha SHO injectors have been precision flow rate tested to be 80 percent peaked on stock units at sea level without modifications. R&D offers high performance fuel injectors with a higher atomization spray pattern that are easily capable of delivering fuel flow specifications to accommodate up to 400 horsepower! R&D has flow rate tested the O.E.M. Yamaha SHO injectors and verified them to flow 396 cc at 43 PSI of fuel pressure, which rates them to flow 30 pounds of fuel per hour. The R&D High Performance Fuel Injectors have precision flow rate tested to 525 cc at 43 PSI of fuel pressure, and 625 cc at 70 PSI of fuel pressure, which rates them to flow as much as 62 pounds of fuel per hour. R&D High Performance Injectors have been flow rate tested to perform excellent, delivering precise fuel at fuel pressure ratings ranging from 40 to 80 PSI. Each R&D High Performance Fuel Injector Kit will come packaged with vital flow test rating information that will be broken down specifically in five pound increments in fuel pressure to give the fuel flow delivery information that will help in tuning fuel pressure to match the engines fuel flow needs based on horsepower gains over stock. R&D offers only the highest quality fuel injectors, fuel pressure regulators, and fuel management accessories, for all your engine management needs. *812-18001 R&D ID 725 CC Injector Kit - 375-400 HP **812-18002 R&D ID 1000 CC Injector Kit - 400+ HP Description Part No. R&D FX-SHO/FZR/FZS High Perf. Fuel Injector Kit 812-18000 R&D FX-SHO/FZR/FZS ID 725CC Injector Kit* 812-18001 R&D FX-SHO/FZR/FZS ID 1000CC Injector Kit** 812-18002 RIVA FX SHO/FZR PRO-SERIES FUEL INJECTOR KIT Riva’s high performance fuel injector kit supplies modified Yamaha 1.8 liter Supercharged engines with additional fuel for RIVA Stage II & III applications. These 95lb injectors are designed for use with RIVA Pro-Series ECU (RY11840-01-C, page 7) for correct calibration. Injector sets are flow-matched for optimum idle quality and peak performance. Description Part No. Riva FX-SHO/FZR/FZS RY12040-I-KIT Pro-Series Fuel Injector Kit R&D #4 & #6 FUEL RETURN LINE KIT R&D has developed a two larger fuel return line kits for the FX-SHO/FZR/FZS. Increasing the diameter of the fuel return line to #4 or #6, decreases line pressure and increases fuel volume, yielding increased tuning ability in high heat and higher performance applications. Description Part No. R&D #4 Fuel Return Line 612-00082 R&D #6 Fuel Return Line 612-00083 R&D FX-SHO/FZR/FZS MULTI-PRESSURE PORT BOOST GAUGE/SURGE/RRFPS ADAPTOR KIT The R&D Yamaha FX-SHO/FZR/FZS Multi-Pressure Port Adaptor Kit will allow quick and easy hook up of digital or manual boost gauges with the R&D Multi-port billet adaptor. The R&D Pressure Port Adaptor installs between the MAP sensor and the MAP sensor bracket as a “bolt on” part with no modifications. Operate a vacuum/boost gauge, check plenum air temperatures, and operate a surge protection valve at the same time, or run a boost gauge, surge protection device, and operate a boost referenced fuel pressure regulator (RRFPR) at the same time with one simple part. The R&D Pressure Port Adaptor Kit comes complete with longer MAP sensor mounting screws, o-ring seals, nylon cable ties, all mounting hardware and instruction. Description Part No. R&D FX-SHO/FZR/FZS Multi-Pressure Port Boost 612-92005 Gauge/Surge/RRFPS Adaptor Kit R&D FX-SHO/FZR/FZS HIGH PERFORMANCE HIGH VOLUME FUEL PUMP KITS R&D Performance carries a complete line up of high performance replacement fuel pumps that are machined specifically to fit the Yamaha FX-SHO/FZR/FZS fuel pump housing and are offered in a variety of flow ratings to facilitate from basic low cost replacement to an all out 500 H.P. race machine. All R&D FX-SHO/FZR/FZS fuel pumps have been precision flow rate tested and charted in (LPH) liters per hour. R&D FX-SHO/FZR/FZS fuel pumps arrive complete with Yamaha FX-SHO/FZR/FZS model specific instal- lation instructions complete with detailed photos that will help make the fuel pump installation quick and easy. NOTE: There are no modifications necessary to install the R&D fuel pump therefore switching back to the O.E.M. fuel pump assembly is quick and easy as well. Description Part No. R&D FX-SHO/FZR/FZS 190 LPH 812-35190 OEM Replacement Fuel Pump Kit R&D FX-SHO/FZR/FZS 255 LPH 812-35255 Low Pressure Fuel Pump Kit R&D FX-SHO/FZR/FZS 255 LPH 812-35256 High Pressure Fuel Pump Kit