2010 Hot Products Catalog

24 INTAKE SYSTEMS YAMAHA 4 STROKE ENGINE/ GASKETS EXHAUST DRIVE LINE HANDLING ELECTRICAL WATERLINE /BILGE STEERING & CONTROLS BODY ACCESSORIES SERVICE TOOLS /HARDWARE CHEMICAL YAMAHA FX-SHO & FZ • INTAKE • SUPERCHARGER R&D FZR/SHO C5 MONSTER CHARGER WHEEL KIT R&D’s new C5-11 Blade Series Racing Monster Compressor Wheel Kit for Yamaha SHO/FZ/FZR engines is a new “ALL OUT” racing product. The C5 will deliver the highest horsepower upgrade available for the HKS supercharger housing. The R&D C5-11 Monster Wheels modern low profile, high flow 11 blade design incorporates larger inducer and exducer diameters create more air flow at all rpm’s. Producing significantly increased horsepower over a drop in style impeller wheel. The R&D Monster Wheel Kit delivers 15 solid pounds of boost pressure at 8300 rpm’s and 17 pounds of boost at 8500 rpm’s. The R&D C5-11 Monster Wheel Kit includes a shop service upgrade that is performed at R&D (IN HOUSE) to your HKS supercharger. R&D will disassemble your supercharger completely, bore out and re-contour the housing to accept the larger C5-11 compressor wheel. R&D installs the new billet Exducer Seal Plate Kit necessary for larger exducer diameter. The C5-11 Racing Monster Wheel Upgrade Kit requires high grade racing gasoline, R&D High Performance Intercooler Kit, an after- market E.C.U. such as an R&D/VI-PEC, MOTEC, AUTRONIC, HALTECH, ETC. and some serious pump assembly and Impeller upgrades. Contact R&D for intercooler suggestions, and impellor pitch/nozzle combination that will be best for your performance level or application. R&D stocks the largest selection of custom impellors for the SHO/FZ/FZR. Description Part No. R&D FX-SHO/FZR/FZS C5 Monster Charger Wheel 612-25005 RIVA FX-SHO/FZR SUPERCHARGER IMPELLERS Riva Racing released the ultimate (drop-in) performance supercharger impellers for the Yamaha 1.8 liter SHO Engine! Working closely with Vortech Engineers, Riva designed these impellers to deliver more horsepower and torque throughout the RPM range resulting in excellent acceleration and top speed. Investment cast from an extremely strong, lightweight proprietary alu- minum and CNC machined to ensure exact tolerances. All new blade design is optimized aerodynamically and precision balanced to deliver smooth opera- tion. Installs easily into stock supercharger housing with no modifications required. Includes detailed installation instructions. B1 produces 11.5psi @ 7,700rpm • E1 produces 16psi @ 8,000rpm NOTE: Both impellers require use of aftermarket engine management system for proper calibration Description Part No. Riva FX-SHO/FZR S/C Impeller - 11.5 psi RY17040-SCI-B1 Riva FX-SHO/FZR S/C Impeller - 16 psi RY17040-SCI-E1 R&D FX-SHO/FZR/FZS C1 MONSTER CHARGER WHEEL R&D’s new C1 11 Blade Series Monster Compressor Wheel Kit for Yamaha SHO/FZS/FZR engines is new and improved to deliver “horse- power you can feel” with instant throttle response, improved mid range acceleration, and increased top end performance. The R&D Monster Wheel replaces the stock wheels inefficient 5 blade design with an all new modern low profile, high flow, 11 blade high tech design. Fits directly into the O.E.M. stock compressor housing with no modifications. The C1-11 Monster works with the OEM intercooler, OEM fuel injectors, OEM ignition system and the R&D Intake CFM Kit. Kit performs well on 91 octane pump gasoline. Boost rated 7/8.5 P.S.I. (7 @ 7500 and 8.5 @ 7700) Horsepower increases were professionally documented by MOTEC AUSTRALIA. • Increased boost pressure ( 3-3.5 over stock @ 7700 rpm) • Increased airflow (1.5-2 pound per minute gain) • 25-30 Horsepower increase and 2 MPH Gain (with OEM ignition) • 70 Horsepower increase (with Motec ECU, CFM kit, 91 pump gas) • Precision balanced (turbo specs .012-.027 gram inches) • Better throttle response, increased horsepower • Ultra easy installation • 91 octane pump gas friendly • Inexpensive horsepower upgrade The C1 Wheel Kit works excellent for recreational use applications retaining the OEM ignition, fuel system, injectors, and intercooler. R&D has data logged and documented the A.F.R. (air to fuel ratio) to be a conservative and safe 11.8-12.0 with the C1 wheel kit. R&D recommends that the R&D Power Core Intake Manifold and intercooler CFM kit or the R&D Stage 1 Intercooler Kit be used with the C1 wheel. Description Part No. R&D FX-SHO/FZR/FZS C1 Monster Charger Wheel 612-25001 R&D FX-SHO/FZR/FZS C3 MONSTER CHARGER WHEEL R&D’s new C3-11 Blade Series Racing Monster Compressor Wheel Kit for Yamaha SHO/FZS/FZR engines is an exciting new racing product that will deliv- er “horsepower you can feel” with instant throttle response, aggressively improved low and mid range acceleration, and increased top end performance. The R&D Monster Wheel replaces the stock wheels low performing 5 blade design with a modern low profile, high flow 11 blade high tech design with a larger exducer diameter to move more air flow at lower rpm’s producing better holeshot horsepower. The R&D C3 Monster Wheel and R&D Exducer Seal Plate Kit will install directly into the O.E.M. stock compressor housing with no modifications. The C3 Racing Monster will require the R&D High Performance Intercooler Kit, and an R&D Impellor upgrade. The C3-11 performs well on 91 octane pump gasoline. Boost rated 10/13 P.S.I. (10 @ 7700 and 13@8300) The new R&D 11 blade series compressor wheels offer the highest levels of airflow and horsepow- er gains available for the 1.8 Yamaha engine using the stock E.C.U. • Increased boost pressure ( 5 P.S.I. over stock @ 7700 rpm) • Increased airflow ( 2.5-3 pound per minute gain) • 35+ Horsepower increase and 2 MPH Gain (with stock ECU) • 300+ Horsepower using aftermarket ECU (MOTEC) • Precision balanced (turbo specs .012-.027 gram inches) • Utilizes O.E.M. ignition system with R&D Impellor Upgrade • Utilizes O.E.M. fuel injectors • 91 octane pump gas friendly NOTE: The C3 Monster Wheel Kit will require impellor upgrades over the C1 impellor suggestions. Contact R&D for intercooler suggestions, and impellor pitch/nozzle combination that will be best for your performance level or applica- tion. R&D stocks the largest selection of custom impellors for the SHO/FZ/FZR. Description Part No. R&D FX-SHO/FZR/FZS C3 Monster Charger Wheel 612-25003