Hot Products 2020 Catlog

HotProductsUSA.com • Orders & Info: 858-453-4454 21 SEA-DOO 4 STROKE INTAKE SYSTEMS ENGINE/ GASKETS EXHAUST DRIVE LINE HANDLING ELECTRICAL WATERLINE /BILGE STEERING & CONTROLS BODY ACCESSORIES SERVICE TOOLS /HARDWARE INDEX © 2020 Hot Products. All rights reserved. Sea-Doo Spark Parts & Accessories are now in the new Sea-Doo Spark feature section pages 10-18 4” SUPERCHARGER SLEEVE Precision molded velocity stack fits snugly onto super- charger inlet. Allows the installation of 4” intake/filter sys- tems for increased air delivery to supercharger. Sized correctly for 4” Kanaflex ducting. Description Part No. R&D Supercharger Sleeve 4" Diameter 613-95044 for Sea-Doo 300 RIVA Sea-Doo 300 SC Adapter RS13140-VS RIVA Sea-Doo 215/230/255/260 SC Adapter RS13050-VS ET 137X4MM CR DROP IN WHEEL FOR 255/260 ET Light Edition Billet Impeller with 4mm spacer. Aftermarket pressure regulator (not included) is required for this modification. 48 lbs injectors are required for this modification (not included). *Some Sea-Doo 255/260 models come with 48 lbs injectors from the factory, please check your OEM specifications before installing this upgrade. 13 to 13.5 lbs of boost @8100 rpm and 15 lbs boost@8500rpm (Clutch slip must be set to 15 lbs) Description Part No. 15 PSI Boost Supercharger ET137X4MM CR Billet Impeller with 4mm spacer RIVA SEA-DOO 300 XXX CHARGER 23 PSI @ 9,200 rpm 18.5 PSI @ 8,500 rpm 18.5 PSI @ 8,500 rpm 17 PSI @ 8,000 rpm Description Part No. Sea-Doo 300 XXX Charger RS17140-XXX Description Part No. Sea-Doo 300 XX Charger RS17140-135 Sea-Doo 255/260 Charger RS17080-SCI-XX2 ET 142MM 300 SEA-DOO The all new ET 142mm x 3.2mm spacer do-it-yourself. New generation wheel for 2016 Sea-Doo 300 platform. Makes 22 PSI at 9,000 rpm. The new 1.6L engine is designed for midrange to 8,800 rpm. ET does not recommend revving over 9,000 rpm. Requires the back housing to be machined to 143mm. Recommended slip moment be set to 18 foot lbs. There are a few things that are recommended in updating before running any performance. Replace all hose clamps with screw clamps. Retorque all head bolts, ECU remap 8,600 to 8,800 rpm rev limit. Description Part No. A. 22 PSI of Boost Supercharger ET142/300 Billet Impeller with 3.2mm spacer (Do it yourself) B. 22 PSI of Boost Supercharger ET142/300-COMPLETE Billet Impeller with 3.2mm spacer with machined OEM housing ET 135MM 300 SEA-DOO The all new ET 135mm x 3.2mm spacer drop-in wheel. New gener- ation wheel for 2016 Sea-Doo 300 platform. Makes 17.5 PSI at 8,800 rpm. The new 1.6L engine is designed for midrange to 8,800 rpm. ET does not recommend revving over 9,000 rpm. Recommended slip moment be set to 16 foot lbs. There are a few things that are recommended in updating before running any performance. Replace all hose clamps with screw clamps. Retorque all head bolts, ECU remap 8,600 to 8,800 rpm rev limit. Description Part No. 17.5 PSI of Boost Supercharger ET135/300 Billet Impeller with 3mm spacer A. B. SEA-DOO 4-STROKE • SUPERCHARGER RIVA SEA-DOO 300 XX CHARGER 12 PSI @ 8,000 rpm 15 PSI @ 8,400 rpm 17.5 PSI @ 8,700 rpm RIVA SEA-DOO 255/260 XX-2 CHARGER 13.5 PSI @ 8,100 rpm 15 PSI @ 8,500 rpm ET 300 WATER COOLER COVER ET is proud to announce this new innovative full Billet O-ringed water cooler cover. The back side of the ETWater Cooler is CNC machined to the contour of the OEM housing using surfacing also O-ringed. Safely used with all OEM and ET Chargers, we use spacers so that ensures that the casting is thick and strong, 7mm thick or .275 throw. It’s easy to install without any modifications to the OEM Front housing. Comes with bolts, fittings and rings. Dropped the back housing temp by 45 deg in a 20lb setup. Less boost fade. Im- prove bearing and seal life also less under hood heat. Description Part No. ET Billet Water Cooler Cover ET-WC-COVER-4P Sea-Doo 300 with 4 posts

RkJQdWJsaXNoZXIy NjEwMDM=