2018 Hot Products Catalog

Orders & Info: 858-453-4454 • HotProductsUSA.com 60 INTAKE SYSTEMS KAWASAKI 1500 SX-R ENGINE/ GASKETS EXHAUST DRIVE LINE HANDLING ELECTRICAL WATERLINE /BILGE STEERING & CONTROLS BODY ACCESSORIES SERVICE TOOLS /HARDWARE CHEMICAL YAMAHA • INTAKE © 2018 Hot Products. All rights reserved. KAWASAKI 1500 SX-R • INTAKE • ENGINE B. R&D RACING ECU REPROGRAMMING R&D ECU Reprogramming is a service performed to the OEM 1500 SX-R ECU. You must ship the ECU from the 1500 SX-R to Hot Products for this service to be performed. Reprogramming RPM Octane-Fuel Part # R1 8050 91 Pump Gas 801-01501 R2 8150 91 Pump Gas 801-01502 R3 8950 91 Pump Gas 801-01503 Pro Stock 100/ETS 9000 100 Race Gas 801-01506 Offshore 8650 100 Race Gas 801-01507 A. C. RIVA RACING POWER FILTER KIT Our Power Filter feeds your SX-R 1500 engine with a steady diet of cool air delivering greatly improved acceleration and RPM. This system draws cool air from front of engine compartment near factory hull vents. Replaces restrictive stock air box with a high volume, precision-formed intake tube. Cool air enters the system via an oversized K&N filter element. Description Part No. RIVA Power Filter Kit, 1500 SX-R RK13110 Waterproof Pre Filter for RK13110 RS13050-PF-BLK RIVA RACING MAPTUNER X Description Part No. Maptuner X Bundle RK110NA-B-SXR A. Maptuner X & USB Cable 01-MTX B. Tuning License RK110SC-LTL C. Programming Cable 01-MT026 R&D RACING PERFORMANCE ENGINE COOLING KIT The Kawasaki SX-R’s stock engine cooling will quickly become inadequate in High Performance arena where Higher Compression Pistons and Camshaft kits, and aggressively timed ECU Packages are installed and used! The R&D Cooling kit for the SXR is very similar to the popular R&D Ultra 310R kit, where Engine Temperature and Oil Temperatures are addressed, and greatly reduced. The R&D’s “Billet” Multi-Port Extra Cooling Block is designed with additional ports over the OEM cooling block. The Multi-Port Cooling Block directly replaces the OEM cooling block mounted to the pump, and allows for an additional Cooling Line (or additional lines) to be added. The R&D Kit adds an additional line direct to the engine which will reduce engine temperatures. The kit also redirects water flow through the Oil Cooler to reduce oil tempera- tures. The Kit will work to ADD Throttle Response, as well as maintain higher top speed averages by getting ride of engine heat fade. Description Part No. Engine Cooling Kit, 1500 SX-R 660-81500 5 port Extra Cooling Manifold only 660-82501 R&D FOAM ENGINE INSERT R&D has developed an inexpensive foam engine insert that installs under the engines oil pan and takes up the tight space between the hull and oil pan. The gap between the engine pan and hull on the SX-R’s is very tight! Some areas are as tight as .250 (1/4) inch)! Small nuts or mm bolts that may get dropped or come loose for any rea- son can get under the engine and get trapped! Very difficult to find or remove! If left un-noticed, a fracture or small hole could get punched to the pan causing leakage, as well as hull damage! “Not Fun”! The R&D Foam Engine Insert will keep small hardware or debris from getting to these areas. The R&D Foam Insert is Chemical and Fuel Resistant, and can be cleaned with any degreaser cleaner and Re-Used just like a servicea- ble air filter! Help to save your engine today! Description Part No. Foam Engine Insert 611-81499 R&D RACING PRO COMP AIR FILTER KIT The R&D filter kit will unleash low-end, mid-range, and peak horsepower trapped in the restrictive stock air box. The super lightweight filter design with an intergraded crankcase vent couples directly to the OEM throttle body, and houses a large plenum to deliver unrestricted air volume and improved air speed. Dyno tested to add 5 Horsepower. Description Part No. R&D Pro Comp Air Filter 1500 SX-R 200-01500