2017 Hot Products Catalog

48 INTAKE SYSTEMS YAMAHA 4 STROKE ENGINE/ GASKETS EXHAUST DRIVE LINE HANDLING ELECTRICAL WATERLINE /BILGE STEERING & CONTROLS BODY ACCESSORIES SERVICE TOOLS /HARDWARE CHEMICAL YAMAHA • FUEL ©2017 Hot Products. All rights reserved. Orders & Info: 858-453-4454 • HotProductsUSA.com R&D FUEL PRESSURE REGULATOR KIT • Fuel pressure will rise on a 1:1 ratio when boost referenced • All ports are 3/8” NPT, with one inlet, 3 outlets, and one return port on the bottom • Beautiful type II bright dip anodized finish • Bypass design produces the ultimate, dynamic fuel delivery system • 3/8” pipe tapped for standard or AN fitting ready • R&D offers pre-assembled #4 AN hose to finish off a return system • R&D offers fuel hose by the foot for custom routing Description Part No. SHO/SVHO/FZR/FZS/VXR/VXS 802-00080 R&D Fuel Pressure Regulator Kit (Shown above) R&D Universal Fuel Pressure Regulator Only 801-25010 (Fittings not included) RIVA RISING RATE FUEL PRESSURE REGULATOR KIT Key Features Include: • Precision fuel pressure control with optional rising rate function. • High quality stainless steel liquid-filled pressure gage. • Large 3/8” fuel return line. • Includes billet Fuel Pressure Regulator Block-Off. • Easy bolt-on installation with OEM fuel connectors. • Includes complete installation instructions & tuning guide. Description Part No. 2008-11 FX-SHO, All FZR/FZS, RY12040-RRFPR-6S5 All VXR/VXS, GP1800 2012 & Newer FX RY12070-RRFPR-6S5 R&D-FX IN-TANK FUEL PRESSURE REGULATOR BLOCK OFF KIT Description Part No. SVHO/SHO/FZR/FZS/VXR/VXS 812-35257 R&D INLINE FUEL PRESSURE GAUGE ADAPTER The R&D Fuel Pressure Gauge Adapter Tool is designed to be a plug in fuel pressure gauge that needs no modifications to install and use. Simply discon- nect the OEM locking fuel connector from the fuel rail and plug the gauge tool directly into the connector. Plug the locking connector supplied on the R&D tool onto the fuel rail and lock. Use the tool to verify fuel pressure and fuel pump condition. Use the tool to set and verify base fuel pressure settings on the R&D Rising Rate Fuel Pressure Regulator (RRFPR). When finished, disconnect the tool and reconnect the stock fuel line. The Adapter installs inline between the OEM fuel rail and the R&D RRFPR via the OEM connec- tors for easy connect and disconnect. The R&D Tool works on both Yamaha and Kawasaki fuel systems. Installation time is only 2 minutes. Liquid filled fuel pressure gauge sold separately. Description Part No. A. R&D Inline Fuel Pressure Gauge Adapter 612-00081 B. R&D Liquid Filled Fuel Pressure Gauge 900-02180 RIVA YAM 1.8L BOOST CLAMP RIVA’S boost clamp will allow you to run up to 17psi of boost pressure in your Yamaha SHO engine when used with RIVA Fuel Pressure Regulator Kit and stock ECU. Device controls communication between stock MAP sensor and stock ECU to allow for higher boost levels and more power. The boost clamp is an integral part of RIVA Stage 2 SHO Engine Kit, producing 260hp when combined with our recommended components. Installs quickly & easily with integrated waterproof connectors. Note: Not required if the stock ECU has been reflashed or if using a RIVA aftermarket ECU. Description Part No. YAM 1.8L Boost Clamp 2008-10 RY11740-BC-6S5 WORX YAMAHA 1.8L FUEL PRESSURE REGULATOR • In-tank replacement increases fuel pressure by approximately 10 psi • Cost effective alternative to external fuel regulator • Ideal for low boost applications and reflashed/aftermarket ECU Description Part No. Yamaha 1.8L Engines WR04025 A. B.