2013 Hot Products Catalog

48 INTAKE SYSTEMS YAMAHA 4 STROKE ENGINE/ GASKETS EXHAUST DRIVE LINE HANDLING ELECTRICAL WATERLINE /BILGE STEERING & CONTROLS BODY ACCESSORIES SERVICE TOOLS /HARDWARE CHEMICAL YAMAHA FX-SHO & FZ • INTERCOOLER ©2013 Hot Products. All rights reserved. R&D FX-SHO/FZR/FZS INTERCOOLER COOLING KIT The R&D Yamaha FX-SHO/FZR/FZS Intercooler Temperature Control system was developed to offer an inexpensive complete bolt on kit that will allow the full performance and cooling potential the OEM intercooler has to offer for recreational applications. Intercooler core water temperatures have a range of affect on the supercharged air temperatures that enter into the engine. The Yamaha SHO Intercooler operates on a single low pressure (10 P.S.I.) line of lake temperature water to cool the intercooler. R&D has found that by adding an additional intercooler water in line, and adding an additional water out line and bypass fitting, there will be double the water flow volume at 20 P.S.I. Reduced intercooler core temperatures can add a noticeable increase in low end and midrange power along with reduced detonation. R&D offers a range of machined flow control fittings to allow water volume control tuning for intercooler temperature adjustments for warm lake water and extreme hot air conditions. R&D also offers a pressure relief blowoff valve kit for high water volume flow rates on higher boost Stage 1 and up engine kits. The R&D Kit will allow temperature tuning that will deliver surprising results. Unlock hidden performance and power potential in the OEM stock intercooler or aftermarket intercooler system by reducing intercooler core temperatures. • More horsepower with cooler intake air temperatures • Increased acceleration and mid range performance • Reduces detonation in hot weather conditions • Temperature control tuneability • An inexpensive recreational performance addition • Pressure relief valve options • Easy installation instruction Description Part No. R&D FX-SHO/FZR/FZS Intercooler Cooling Kit 660-18000 R&D FX- SHO/FZR/FZS INTERCOOLER TEMPERATURE CONTROL PRESSURE RELIEF VALVE KIT R&D also offers a pressure relief blowoff valve kit for high water volume flow rates on higher boost Stage 1 and up engine kits. The R&D kit will allow temperature tuning that will deliver surprising results. Unlock hidden performance and power potential in the OEM stock intercooler or aftermarket intercooler system by reducing intercooler core temperatures. Description Part No. R&D FX-SHO/FZR/FZS Intercooler 660-82511 Temperature Control Pressure Relief Valve Kit R&D YAMAHA FX-SHO/FZR ENGINE INTERCOOLER COOLING KIT The R&D Yamaha FX-SHO/FZR Engine/Intercooler Cooling Kit was developed for high performance recreational and racing use. Extensive engine cooling and inlet air temperature testing using both MoTeC I2 and Innovate digital logging systems has proven the R&D High Performance Cooling Kit to offer double the water volume flow through the engine, oil cooler, and intercooler as well as increase water pressure. The OEM cooling system has a very low water pressure (10 P.S.I. at 7600 rpm’s) and a low water volume flow. The new R&D kit will double the water volume which will lower intake air temperature by 15-20 degrees as well as lower engine block and head temperatures by 40-50 degrees. The additional oil cooler water line will lower engine oil temperatures by 15-20 degrees promoting better lubrication and increased engine cooling. The R&D Cooling Kit arrives 100 percent complete with pre-cut hoses, “T” connectors, dual line pump block, through hull bulkhead fittings, hose clamps, water by-pass fittings, the thermostat removal sealing washer, and detailed instructions with pictures. R&D recommends the cooling system to be upgraded as a stand alone performance upgrade and a must have kit addition when installing power adders such as R&D Supercharger Wheels, Engine Performance Parts, and Engine Management Kit parts. Cooler engine, inlet air, and oil temperatures produce higher horsepower with decrease detonation • Better throttle response, increased horsepower • Cooler header and under seat temperatures • Increased power with cooler air inlet temperatures • Cooler cylinder and cylinder head will reduce knock • Cooler oil will lubricate better and last longer • Increased engine protection • Improved clutch performance with cooler oil Description Part No. R&D SHO/FZR Engine/Intercooler Cooling Kit 660-18001 RIVA ENGINE BREATHER UPGRADE KIT Easy to install Engine Breather Upgrade Kit eliminates power-robbing crankcase emissions from your engine's air intake. Increases horsepower by removing the engine's requirement to burn relatively non-combustible oil. Also improves intercooler efficiency by preventing the oil sludge coating that lowers thermal efficiency. Easy installation retains highly efficient OEM air/oil separator system. Kit includes pre-formed hose with attached K&N filter along with all necessary hardware & instructions. Description Part No. RIVA Engine Breather Upgrade Kit RY19040-EBUK-I YAM 1.8L (2008-11) RIVA Engine Breather RY19040-12-EBUK Upgrade Kit YAM 1.8L (2012)