Basic HTML Version
171
FOUR
STROKE
INTAKE
SYSTEMS
ENGINE/
GASKETS
EXHAUST
DRIVE LINE
HANDLING
ELECTRICAL
WATERLINE
/BILGE
STEERING
& CONTROLS
BODY
ACCESSORIES
SERVICE TOOLS
/HARDWARE
CHEMICAL
RRP PRECISION TURN PLATE
The RRP Turn Plate is one inch shorter than the OEM turn plate moving
the rider up in the tray. Fits Kawasaki, Yamaha, Polaris and Hydro-Space.
The steering arm can be mounted either side, allowing this turn plate to
fit any ski. The steering arm is slotted to allow for extremely precise
steering ratio adjustments. RRP has also integrated a grease fitting on
the turn plate that allows the rider to fully grease your steering system
in only few seconds. The turn plate will accept V bars and straight bars
and fits most after market steering systems.
Description
Part No.
RRP -1” Precision Turn Plate
TRN-PLT-UNIV
RRP Straight Standup Bars 22.2mm
ST-B*
*Note: Big advantage of using the straight bars it brings the
rider closer to the pivot point, less movement going left and
right with the bars more stability in the turn because the bars
are staying closer to the rider.
Straight Bars
22.2mm Clamping Area
RRP AST
STEERING SYSTEM
FOR 28.6MM FAT
BARS
This RRP AST (Advanced
Steering Technology) steering
system has been designed for all
types of riding from Freestyle to
racing and from freeride to the
recreational rider. Each rider will
find benefits in this new concept.
The concept behind this steering
system has many features:
- To bring the rider closer to the pivot point
- Less movement to turn the bars (quicker steering)
- Lowers the center of gravity
- Multiple bar position allowing the rider to perfect his riding style
- Fits all stand up watercraft due to the moveable steering cable arm
- Slotted mounting for the steering cable ball for maximum adjustment.
- Utilizes the fat bar 28.6 mm technology for better clamping surface
- The system uses bearings and is o-rings sealed
- Grease Zerk fitting to grease the bearing system for easy maintenance
- 100% Compatible with RRP carbon pole pads (both models)
Description
Part No.
RRP AST “Fat” Bar Steering System
STR-SYS-UNIV-F
*Note: This system will work with other chin pads but will require fit modification to
clear the steering when riding. Riders using the straight 28.6 bars will need to use
the extended base clamp if not the controls will hit the pad before the turn plate hits
the steering stopper.
RRP “FAT” PERFORMANCE HANDLEBARS
Brand new for 2008, RRP has developed these “Fat” bars to be extremely
strong for freestyle and racing. All RRP handlebars are “Fat” bars and are
28.6mm at the clamping area.
Description
Part No.
1. Straight Freestyle Bars
ST-B-F*
2. Closed Course Bars - 50mm Bend
50-B-F
3. Closed Course Bars - 75mm Bend
75-B-F
*Note: Riders using the straight 28,6 bars will need to use the extend-
ed base clamp if not the controls will hit the pad before the turn plate
hits the steering stopper. Extended Base Clamps Part# EXT-BS-PLT
System
Installed
1. Freestyle
2. Closed Course
3. Closed Course
50mm
75mm
28.6mm
28.6mm
28.6mm
22.2mm
22.2mm
22.2mm
RRP UNIVERSAL STEERING SYSTEM
Designed to match and compliment the RRP Turn Plate, this steering
system improves the steering feel, eliminates steering slop and is much
stronger than the OEM steering systems on standup watercraft. This kit
will fit most aftermarket turn plates.
Description
Part No.
RRP Bearing Steering System
STR-SYST-UNIV