Basic HTML Version
163
FOUR
STROKE
INTAKE
SYSTEMS
ENGINE/
GASKETS
EXHAUST
DRIVE LINE
HANDLING
ELECTRICAL WATERLINE
/BILGE
STEERING
& CONTROLS
BODY
ACCESSORIES
SERVICE TOOLS
/HARDWARE
CHEMICAL
JET WORKS ADJUSTABLE
WATER RESTRICTOR
Allows user to adjust flow on any 3/8” ID waterline.
A great product for fine tuning engine/exhaust
temperature for maximum power.
Description
Part No.
Adjustable Water Restrictor
JWR-01
RIVA RACING ALUMINUM
THRU HULL CONNECTORS
Riva Racing’s aluminum thru hull fittings are
anodized to prevent corrosion. Available in 3/8” and
1/2” waterline applications.
Description
Part No.
3/8” Thru Hull Connector
RY1013-TH-3/8
1/2” Thru Hull Connector
RY1013-TH-1/2
JETWORKS THRU HULL FITTING
Description
Part No.
3/8” Thru Hull Connector
TF38
JET WORKS QUICK
DISCONNECT WATER
RESTRICTOR
Description
Quick DisconnectWater Restrictor 3/8”
Quick DisconnectWater Restrictor 1/4”
Part No.
QD-38
QD-14
GP1300R 1/2" X 1/2"
BULKHEAD FITTINGS
The R&D Billet Aluminum Fitting allows for easy
installation for extra cooling lines through the
bulk head.
Description
1/2" x 1/2" Bulkhead Fittings
Part No.
660-00012
JET WORKS
FLOW CONTROL VALVE
Description
Standard Flow Control Valve 3/8”
Pro Flow Control Valve 3/8”
Pro Flow Control Valve 1/4”
Part No.
52-3118
52-3119
52-3122
Description
1/2” Water Line Strainer
#40 Mesh Replacement
(#40 is finer than #20)
Part No.
56-9010
10485
WATER STRAINER
The
Water Strainer
is a must to trap all sand,
shell, and vegetation particles.
No more clogged water lines!!
Height=2” (51mm)
Footprint= 2-1/2” (64mm) - Round
2-1/2”
65mm
3-7/8”
100mm
Description
Part No.
Waterline Inline Filter
COMFTG0036
FOR FACTORY PIPE
CHAMBER WATERLINE
QD-38 comes with 4/3/2mm restrictor inserts used
for controlling water flow through exit passes,
stinger, head pipes, etc. QD-14 is for use with
Mikuni Jets (not included), and allows quick
change in small increments of water flow.
The Flow Control Valve provides improved throttle
response and much quicker starts by drying out
your waterbox at low rpm and idle speeds. Tests
have shown an average acceleration improvement
of 10 feet over a non-equipped model in the first
50 feet. The Flow Control Valve allows
unrestricted water flow to the Stinger for better
top speed. Yet it controls the amount of water at
low speeds for better response. It also allows for
an easier tuning of the Carburetors. It does not
interfere with normal engine or exhaust pipe
cooling and is compatible with all electronic water
injection systems. Race Legal for All Classes.
Two Models are available. Both are adjustable.
The Standard Flow Control Valve is preset at 3.5
p.s.i. and is adjusted by adding the supplied
stainless steel shims to increase the spring
tension. The Pro-Series is externally adjustable
by turning the outer housing by hand. Pressure
can be tested with pop off gauge. All PWC
w/OEM or aftermarket exhaust systems (except
Yamaha’s w/OEM exhaust)
LOW PROFILE
WATER STRAINERS
Smaller water strainers. Ideal for using with
water injection or tight space.
Height: 2-3/8” (60mm)
Footprint: 1-3/8” (35mm) - Round
Description
3/4” Water Line Strainer
for Sea Doo 4-Stroke
1/2” Water Line Strainer
3/8” Water Line Strainer
#20 Mesh Replacement
#40 Mesh Replacement
(#40 Mesh is finer than #20 Mesh)
Part No.
56-9004
56-9005
56-9006
20420020
20420040